Assessing fire behaviour of common building materials with a cone calorimeter
Citation
International journal on architectural science, v.5, no.4, 2004, pp. 91-98
Abstract
Fire behaviour of selected samples of building materials including wood and plastic materials such as polyvinyl chloride (PVC) and poly(methyl methacrylate) (PMMA) commonly used in the market were assessed. Both thermal aspects and smoke toxicity were studied by testing the samples of wood, PVC and PMMA in a cone calorimeter. PVC was found to be very toxic as it has the smallest value of smoke potency. Note much smoke was given out in testing wood with a cone calorimeter. PMMA has a higher value of smoke potency, appeared to be not so toxic.
A flashover heat flux at floor lever of 2 kWm-2 was applied. It was found that under such heat flux, both wood and PMMA were ignited, but PVC was very difficult to ignite. Therefore, the thermal effects of burning PVC by a accidental fire would not be so bad. However, when the heat flux was increased to 50 kWm-2, smoke would give problems upon ignition of the materials.
(1) Introduction
(2) Cone calorimeter tests
(3) Key thermal parameters deduced
(4) Smoke parameters
(5) Discussions
(6) Conclusions
(7) Acknowledgement
(8) References
Description
Type
Article
Format
Date
2004
Language
en